Компонента GM328A Transistor Tester Graphic Wave Signal LCRRLCPWM DIY електронски модул

Други карактеристики

Size:

75 x 7 2 x 20 mm(L x W x H)

Tpye:

GM328A

Working current:

9V voltage, stable working current of about 20mA.

Features:

1. Using 2015 V1.12 version of the software. :

2. Power supply using 9V stack battery. :

3. The download interface is standard 6 wire program. :

4. The 12864 dot matrix LCD screen, display more abundant in content, with pictures. :

5. The impact of the accuracy of the relevant resistance using 1/1000 thin film resistors, and the rest are also used in the 1/100 film resistor. :

Basic function:

1. Can automatically detect PNP, NPN bipolar transistor :

2. Automatic identification of the components of the pin. :

3. Capacitance can be measured :

4. Can detect bipolar transistor and MOS tube's protection diode. :

5. Can be shown with a decimal value of two, resolution of 0.01 ohm. :

6. Reverse breakdown voltage below 4.5V regulator can be identified. :

7. Gate threshold voltage and gate capacitance of the MOS field effect transistor. :

8. Can simultaneously measure two resistance and the resistance symbol display. :

9. The resolution of resistance measurement is 0.1 ohm, which can be measured to 50M ohm. :

10. 2uF above the capacitor can simultaneously measure the equivalent series resistance :

value. :

11. Two diodes can be displayed in the right order and the diode symbol, while the forward voltage of the diode is given. :

12. Only a single measurement can be obtained the connection mode of the rectifier bridge. :

Extended functionality (via menu selection):

1. Can produce 1Hz-2MHz square wave signal. :

2. Can produce a fixed frequency, but the pulse width of the pulse wave, a short press key width of 1% increments, a long press the button to increase the width of 10%. :

3. Separate capacitor and function can be started by menu. :

Package included:

1 x Transistor Tester (Battery is not used) :

| :